Introduction
If you device handle is detoriorated and you need to remove and/or replace it these are the steps you should follow.
Parts
-
-
Grip the drill. Locate the red locking switch on the back of the battery. Hold the switch down.
-
-
-
While holding down the red locking switch, slide the battery towards the back of the drill until the battery is fully removed from the drill.
-
-
-
Grip cordless drill firmly with left hand. Grip the cordless drill handle firmly with the right hand. Rotate the handle counterclockwise in order to remove the handle from the drill.
-
Conclusion
To reassemble your device, follow these instructions in reverse order.
