Introduction

This guide shows how to remove and replace the water filter in your Samsung refrigerator.

The water filter purifies the water that's dispensed at the door or used to make ice. If your water filter replacement light is blinking or your water tastes strange, you may need to replace your water filter.

If you have trouble removing the filter, there may be water pressure build up. Run the water for a few seconds to relieve the pressure and try again.

This guide will work for most Samsung Refrigerators. This guide is based on a model RF28R7201SG Refrigerator. If you have a different model, you may encounter some minor disassembly differences, but the overall repair process will be the same.

  1. O2XGt1FbR2wqssVR
    O2XGt1FbR2wqssVR
    L5gfkBAXIADyme3l
    • Open both French doors for the refrigerator compartment.

  2. P6teCSrEJebXdEwW
    P6teCSrEJebXdEwW
    ElolNyJmOGfoNA5i
    • Locate the water filter.

    • On this model, the filter can be found at the bottom of the main compartment, between the crisper drawers.

  3. BuKDOO2e6tBNBXSW
    BuKDOO2e6tBNBXSW
    sXSjhDcKeLnFbn1l
    • Twist the water filter cap counter-clockwise until it's loosened from its housing.

  4. LEnvRNtwhGmjuAZf
    LEnvRNtwhGmjuAZf
    lHGthkUhDOmcV6uk
    • Pull the water filter straight out of its housing and remove it.

    • When you install the replacement filter, remember to remove the cap on the new filter.

  5. PrOkaignsEnlHUiC
    PrOkaignsEnlHUiC
    IWDscPsuLVySpSK1
    • Run the water to flush the filter and check for leaks for a few minutes.

    • Press reset on the filter indicator.

Conclusion

To reassemble your device, follow these instructions in reverse order.

nicO

Member since: 14/04/15

15927 Reputation

2 comments

IS there a difference from the HAF-QIN and the HAF-QIN/EXP

bigjon7379 -

Does anyone have instructions on taking out the filter assembly to find where leaks are coming from?

Larry -