Rug Doctor Handle Replacement

Written By: Arthur Shi
  • Comments: 1
Rug Doctor Handle Replacement

Difficulty

Easy

Steps

4

Time Required

5 - 10 minutes

Introduction

Prerequisite guide only! Removes the handle from the body of the Rug Doctor.

  1. yHVpmR6vcvKFYF3x

    • Before you begin disassembly, make sure that the Rug Doctor is not plugged in and that all reservoirs are empty of liquids.

    • Unclip the clear hose from the back of the Rug Doctor.

    Include the part number of the c shaped plate.

    JAMES -

  2. qsfWEOHmXGF1xEWO
    qsfWEOHmXGF1xEWO
    ZmYaR5vWrwOa2m62

    • Use a 7/16" (11 mm OK) wrench to hold the handle axle while you use a 7/16" socket to remove the cap nut securing the axle end.

  3. dke3rWFJ2AEmTiJW
    dke3rWFJ2AEmTiJW
    e5UxIKSmKHVdAEsF

    • Support the handle with one hand. It will be loose after this step.

    • Use fingers or pliers to pull out the handle axle.

    • If the axle feels hard to pull out, squeeze the handle release lever to release pressure on the axle.

  4. NnkjsnZHN3nh5Ow4

    • Detach the handle from the Rug Doctor and set it down.

    • If you need more cable slack, you can set the Rug Doctor on its side.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Arthur Shi

Member since: 03/01/18

263396 Reputation

0 comments