RotoZip Rebel REB01 Type 2 Saw Casing Removal.

Written By: Syed Hasan
  • Comments: 0
RotoZip Rebel REB01 Type 2 Saw Casing Removal.

Difficulty

Easy

Steps

5

Time Required

3 - 5 minutes

Introduction

  1. ETr6OdrTT4eLDToB

    • Unplug the saw before attempting any of the replacement guides.

    • Orient the saw so that the handle is closest to you and the saw end points towards the left.

  2. qEcEwpJ5BeXQPTbA
    qEcEwpJ5BeXQPTbA
    QOwnBcPcmAnvbSaD

    • Push down on the grey lock on the right side of the handle to unlock it.

    • Pull the handle to detach it from the saw.

  3. bRAII1rW6DLRakve
    bRAII1rW6DLRakve
    BHqnn3J1wXwGTTSG

    • Lift the black lock at the tip of the saw to unlock the depth gauge.

    • Pull the depth gauge to detach it from the saw.

  4. CRytr3ww43xeZodL

    • Rotate the device so that the bottom of the saw is facing upwards.

    • Remove the six 20mm screws with a 6mm flathead screwdriver.

  5. UiyWXClMYTiAnhUK
    UiyWXClMYTiAnhUK
    EHSXKXh2UAavlJEY

    • Cut through the stickers on the right and left sides of the saw using a metal spudger.

    • Pull off the top half of the casing.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Syed Hasan

Member since: 06/10/16

143 Reputation

0 comments