Little Wonder 4 HP Honda Pro Edger 62320001 Rev B V Belt Replacement

Written By: Adam O'Camb
  • Comments: 0
Little Wonder 4 HP Honda Pro Edger 62320001 Rev B V Belt Replacement

Difficulty

Moderate

Steps

7

Time Required

10 - 30 minutes

Introduction

Use this guide to remove or replace the V Belts on a Little Wonder 4 HP Honda Pro Edger 62320001 Rev B.

  1. wa1ZVLYy3LigEYxu

    • Before you begin, make sure the edger is switched off and the red throttle adjuster is in the disengaged position. Disconnect the spark plug.

    • Move the blade adjusting lever down into the raised position.

  2. hEyiHRFalSb1WckT
    hEyiHRFalSb1WckT
    WQ6v3hsERiplCtcJ
    XvvWDDaGDcc6NAFZ

    • Lift the belt slackener lever to take tensions off the belts.

    • Secure it in the slackened position.

  3. sBwxCDp422PCtJGF

    • Use a 3/8 inch socket and ratchet to remove the two bolts securing the belt guard.

  4. f4HpPfoZ12XFZPIp
    f4HpPfoZ12XFZPIp
    SlGG1supbmGmlRKh
    eCyXKI6WRAQHDjqE

    • Slide the belt guard forward and away from the belt pulley.

    • Slide the guard to the side, away from the wheels to expose the belts.

  5. cUOjqVVEhja3Vvfm
    cUOjqVVEhja3Vvfm
    x3GZTyAxDRnPB3hT
    mNUZVu56ycONNeml

    • Slide the inner belt toward the wheel and off of the pulley.

  6. bcUPVuQaqG2qHASW
    bcUPVuQaqG2qHASW
    q2bQc2EfYCVMyYbH
    JH5jQQEZdGBkBHJb

    • Slide the outer belt across the pulley, toward the wheel, and off of the pulley.

  7. G66AoOMWgvZHLhEq
    G66AoOMWgvZHLhEq
    FTCJEvgJyGtxfUwp
    N5LVlChMHhJXu2vb

    • Slide both belts away from the engine and off of the pulleys.

    • Remove both belts.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

Adam O'Camb

Member since: 11/04/15

202441 Reputation

0 comments