Insert Filament (Before Printing)

Written By: Mousta Impressoras 3D
  • Comments: 0
Insert Filament (Before Printing)

Difficulty

Very easy

Steps

3

Time Required

2 minutes

Introduction

  1. ohBdMXUDyexZvmiU
    ohBdMXUDyexZvmiU
    3EDXOPJaPNoZPysW

    • Select "Quick Setup" from the home menu.

    • Select the "Pre-heat" option PLA

  2. qXPbZj5hZBpAmeH3
    qXPbZj5hZBpAmeH3
    6P5PPgHwyqpEEpNI

    • Press the ear of the extruder with one hand and insert the filament into the hole as shown in the pictures.

  3. d6HgdJJlJLNOWDvI

    • Push the filament through the PTFE tube until it exits through the nozzle to make sure it has been inserted all the way.

Conclusion

Ready! Your Filament is inserted!

Author

Mousta Impressoras 3D

Member since: 17/03/17

691 Reputation

0 comments