Andis T Outliner Trimmer with T Blade Model G Top Blade Replacement

Written By: David Taylor
  • Comments: 1
Andis T Outliner Trimmer with T Blade Model G Top Blade Replacement

Difficulty

Easy

Steps

5

Time Required

5 - 10 minutes

Introduction

This repair guide will show you how to replace the top blade on your Andis T Outliner Trimmer with T Blade Model G.

A dull blade is the best indicator that you need to replace the blade. If your razor pulls your hairs or begins to feel rough on your skin, it’s likely time for a replacement.

The five-step process is easy. Each of the steps is accompanied by a brief description and photos demonstrating what you will need to do.

Note: The blade is sharp so use caution when handling it.

  1. wwXfAVLNnSiRe1OG
    wwXfAVLNnSiRe1OG
    AWV1AcGe25kcSYF4
    C5Hay5cql1glpieF

    • Complete this step to reduce the risk of burns, fire, electric shock, or injury.

    • Turn the control on the trimmers to "off".

    • Remove the plug from the electrical outlet.

  2. rhjcXJSAeq1CiAh2
    rhjcXJSAeq1CiAh2
    yUSTCmNgODAN6E26
    3pPhTTOBdBrGKyM1

    • Remove the two blade screws from the top blade of the trimmer.

  3. OE5teQoSqSugTUZO
    OE5teQoSqSugTUZO
    DbYoHGLvIjhKcym5

    • Lift the top blade from the device.

    • The bottom blade is attached, but not secured, to the underside of the top blade.

  4. ltKvlhrJ1v1RBYV1
    ltKvlhrJ1v1RBYV1
    GAJCK2QJuLikdTuI

    • Flip the top blade over.

    • Lift the bottom blade from the top blade.

  5. pfKEEVo3PgxtiYf1
    pfKEEVo3PgxtiYf1
    JOxrcLd1g3CSKu4k

    • Clean or lubricate the device if necessary.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Author

David Taylor

Member since: 09/10/14

151 Reputation

One comment

Trying to find out how to sharpen. Blades are so expensive. $ 24 per pack.

I cut my hair every two weeks. Then dull blades.

I'd invest in some type of sharpening tool. ( Not sand paper ).

[email protected]

Map daddy -